Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the responsive cooking control of gas cooktops, but requires an electric oven for baking? Discover a dual-fuel range cooktop that offers the best of both worlds.
Many home chefs with experience prefer gas cooktops due to their superior temperature control and capacity to utilize advanced cooking techniques such as grilling. These powerful stoves are expensive particularly if they require an extra gas connection and an electrician to install them.
What is a 13amp outlet?
If you have a dual fuel range cooker (also known as a gas and electric oven), then you'll need an appropriate 13 amp plug. The plug should be wired by a certified electrician to the cooker ring.
This ensures that the current flowing through the plug is safe and not excessive, which could result in an electrical fire danger. The plug has a fuse that controls the current. The fuse goes out whenever the current flows through it beyond its capacity. This protects the appliance from over-charge of electricity.
The fuse is rated at 13 amps, as shown on top of the plug. This is the maximum amount of current the plug could carry without damaging the appliance or heating the socket. When replacing fuses, it is essential to use the same amperage rating as the original. If you replace the fuse using one with an alternative rating, you run the risk of overheating the socket, and potentially putting yourself and others in danger.
A 13 amp fuse is likely to be a ceramic type that is extremely durable and is able to withstand extreme temperatures generated by a range cooker. Ceramic elements are also fire-resistant, and thus a better choice than other kinds.
There are many ways in which 13 amp plugs can be fitted. It can be connected to an existing live socket, and the flex then connected to this by either a screw or a jaw-type cord clamp. The clamp on the cord should be tightened after the plug is tightly pushed into place.
Before connecting the wires you may need to remove the wiring diagram on cardboard that is positioned on top of the pins on some plugs. The wires need to be cut to the proper length, because if they are too long they can get crushed when the plug covers are replaced. The earth wire must be the longest one to ensure that it is connected before the neutral and line pins.
How do I install a 13amp plug?
The vast majority of dual fuel range cookers sold in the UK are connected to an outlet with a 13 amp rating and this is crucial because ovens draw a substantial amount of current and standard plug sockets are only rated at 10 amps.
Generally speaking, new appliances must be fitted with plugs at the time of sale. This is all part of complying with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances may not have a plug and this could be the reason for the issue.
The first thing to do when connecting a cooker with an existing plug socket is to check that the fuse rating of the fuse box is similar to that of the plug. This is vital because a fuse that is not properly sized could be dangerous.
It is also advisable to make sure that the fuse is fully installed within the cartridge and that there isn't any excessive movement within it. The next step is to prepare the flex that will be used. Remove the sheathing to expose the three conductors insulated. Then, nick the sheathing at the entry point to the plug (beyond the cord grip) with a utility knife without penetrating the individual conductors that are insulated. The nick should be wide enough to allow the sheathing to split and enlarge the nick when it is pulled back revealing the cable beneath. Finally cut off the excess sheathing and leave approximately 40mm of length that extends beyond the flexing end.
This flex should be placed over the plug with the earth terminal on the top and the neutral and live terminals at the bottom. Utilizing the colored conductors to guide you to the right direction, the sheathing should be removed from each pin, and the internal cable is inserted to the appropriate terminal by using the cord grip. If the plug has a clamp for cords that is screw-type, let it loosen and then pull the insulation back to expose the copper wires. Then, connect each conductor that is insulated to the correct terminal (starting with the earth before neutral, and then the live) using the channel they are running through the plug.
What is the maximum current draw of a plug with 13amps?
The maximum current draw for 13amp plugs at 230volts is 3kw. This is quite a bit of power, however the standard fuse in the UK plug will not fail until the cable is heated to a dangerous temperature. A defective plug or socket can cause a fire so it's vital to be vigilant about how much power you use particularly in the kitchen.
The fuse in plugtops is ceramic, about 25mm long and rated for 240V mains. They'll have the BS kitemark or similar marking on the side and contain sand. There are glass or plastic alternatives, but they shouldn't be used with a live plug, unless you want to cause a fire and get electrocuted!
Most dual fuel range cookers sold in the UK require a hard-wired connection and will not plug directly into an outlet on the wall. They are usually connected to a specific cooker ring circuit, which is only suitable for appliances that use up to 20 amps.
Check the ring circuit of your home using the fuse box, or contact an electrician nearby. You can ask whether the sockets are connected to the same ring or if they are distinct. They will also be able to tell you if there is an individual circuit that powers your oven.
The size of your kitchen is one of the main factors when you decide to buy a dual fuel range cooker. Luckily, we have a wide range of cookers that will fit any space, including compact 50-60 cm dual fuel models as well as huge 90cm + double oven models from leading brands like Rangemaster and StovesAreUs.
If you're after something different Don't worry, we also have a great range of gas and electric multifunction cookers. These versatile machines let you cook a variety of meals such as pasta, casseroles and curries.
Currys offers a wide range of Cookers. Explore our online collection or visit us in our store to see them. We offer free installation at home and delivery on a selection of range cookers, as well as flexible payments options. Our staff is ready to answer any questions you might have. Contact us by email or telephone. Credit is subject to the status of the account, and terms and conditions apply.
What is the maximum draw of an appliance switch?
There is a lot confusion about the maximum current draw of a cooker switch. The majority of cookers are hard-wired and connected to an oven-ring circuit and not an ordinary socket. This is due to the fact that they often consume far more than 20 amps of power each time the gas hob and electric oven are in use.
There aren't any dual fuel range cookers that can be fitted in a standard socket since this could pose an extremely high risk of fire and violate electrical regulations. A licensed electrician must always install new electrical wiring in the kitchen, connecting them to an oven. They will also make sure that the load of the oven and hob do not exceed the circuit's supply capacity.
Dual fuel range cookers blend the ability to cook with the sensitivity of a gas stove with the precision and accuracy of an electric oven. They are therefore popular with both chefs and home cooks. Dual cookers that use fuel are great for experimenting with various cooking techniques, such as searing or charring.
When purchasing a new range cook, you should take into consideration a variety of factors, including size, functionality, and price. In addition, you will also need to make sure that your house has the right gas hook-up for the appliance. If you're unsure then it's advisable to get an Gas Safe engineer inspect your home prior to installing.
reconditioned dual fuel range cookers come in a range of models to suit all budgets. From affordable models from Indesit and Zanussi to our own Essentials collection. If you are looking for something more sophisticated, we stock a variety of top JennAir models that feature a number innovative features.
It is essential to read the instruction manual for the owner before purchasing a dual-fuel range cooker. This will give you specific information about the gas and electrical requirements. You will need a gas connection in your home. A plumber might be required to install it for you. It is also possible to require an individual cooker-ring circuit installed by an experienced electrical engineer.